Plastic
Chair Tips
Ideal for any
tubing that needs an attractive, economical plastic cap. For Krueger Chairs, Round Legs and other furniture.
Other colors are available
with minimum order.
Rubber
"Crutch" Tips
Heavy duty. Use
anywhere where you need a non-skid surface on the bottom of a tube. The
ribbed type is still commonly used on the ends of crutches. Black color is
standard. Other colors are available with minimum order. For Hampden,
Samsonite and round legs.
Ribbed
Smooth
Part#
Tubing
Color
Style
Price Each
Qty
R
RCT-62B
5/8"
Black
Ribbed
$1.44
RCT-75B 3/4" Black Ribbed 1.35
RCT-87B
7/8"
Black
Ribbed
1.41
RCT-87-WH 7/8" White Ribbed 1.47
RCT-100B
1"
Black
Ribbed
1.80
RCT-100-WH 1" White Ribbed 1.80
RCT-112B
1-1/8"
Black
Ribbed
1.86
S
SCT-75B
3/4"
Black
Smooth
1.35
SCT-87B 7/8" Black Smooth 1.71
SCT-87-WH
7/8"
White
Smooth
1.77
SCT-100B 1" Black Smooth 1.80
SCT-100-WH
1
White
Smooth
1.86
Black color is standard.
Other colors are available with minimum order.
Rubber
"Crutch" Tips with Metal Washer
A metal washer
inside keeps the sharp, open edge of tubing from cutting through the
rubber. These will normally last much longer than the standard rubber
crutch tips. Available from stock in black color, smooth style only. Other
colors are available with a minimum order; please inquire.
Black color is standard.
Other colors are available with minimum order.
Insert
Glides
A popular and
economical way to finish off the end of a tube. Can be used as a glide
where tubing meets the floor, or simply as a decorative plug. Made from
ABS type plastic which has excellent abrasion resistance and will not
become brittle or crack. The stem portion press fits into the inside of
your tubing for a good hold that normally cannot be removed without use of
tools.
Round
Stocked in black Color.
Other colors available.
Square
Rectangular
insert glide. Made from ABS plastic. Standard color is black. Other colors
are available with a minimum quantity
Rectangular
Universal
Insert Caps
Flexible ribs
allow these parts to fit any tube thickness from 14 thru 20 gauge! Perfect
for odd sized tubing or where your tube size varies. Black color is
standard; other colors are available with a minimum order. Made from
low-density polyethylene plastic with a matte finish.
Shown Installed Fits 14 thru 23 Gauge
Round
Square
Rectangular
Universal
Fit Rocker Base Glides
Universal Fit Rocker Base Insert Glide for
outside tube size 1". Flexible ribs allow this part to fit any tube thickness
from 14 thru 20 gauge. Perfect for odd sized tubing or where your tube
thickness varies. Made from low-density polyethylene plastic with a matte
finish
Part#
Tube
Price Each
Qty
IG-209UR-PB
7/8"
$1.44
Rocker
Ball Insert Glides
Ball insert glides
are typically used in the top of exposed tubing. They can also be used at the
bottom where the tube meets the ground at an unusual angle. Special inch fins
inch grip the inside of all tubing with a thickness of 14 to 20 gauge. Made
from Polyethylene plastic.
Ball Insert
